auna iTuner 320 BT Manual Del Usario página 42

EN
42
Battery replacement for the remote control
Press down on the compartment cover, and slide the cover off to open the
compartment. Place the CR2032 battery in the remote control according
to the polarity markings ("+" and "-") inside the compartment and on the
battery.
Place the cover into the compartment, press down lightly, and pushit inside
until is snaps in place.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery
leakage, which could cause fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in
accordance with local regulations.
• Remove the battery from the remote control when not in use for a long
period of time, as corrosion or battery leakage may occur and result in
physical injury, and/or property damage, and/or fire.
Remote control operation range
The remote control sensor on the front unit is sensitive to the remote
control's commands up to a maximum of 4 metres away and within a
maximum of 60° arc.
Note that the operating distance may vary depending on the brightness of
the room.