Palazzetti ECOFIRE VIOLETTA Manual De Instrucciones página 54

11 MENUS
This chapter illustrates the contents of the menus on the stove's display, accessed using the procedure described.
11.1 OPERATING SETTINGS MENU
This menu is used to set and adjust stove operation, and displays all the operating parameters.
Access the "OPERATING SETTINGS MENU" following the "Procedure for accessing the menus" .
The display will show parameters "P" (power), "F" (fan speed) and T (temperature).
To move from one parameter to the next press the
Once all the parameters have been set, press
11.2 TIMER MENU
This menu is used to set the custom programs for automatically starting and/or switching off of stove.
11.3 STOVE SETTINGS MENU
This menu offers the possibility to set various different functions, through a series of submenus.
Access the "STOVE SETTINGS MENU" following the "Procedure for accessing the menus".
SUBMENU
TIME
DATE
LANGUAGE
MENU TYPE
STAND-BY
BUZZER
NIGHT SET
T.
LOCK
BUTTONS
RESET
ECONOMY
54
DESCRIPTION
Access this submenu to set and adjust the clock
Access this submenu to set and adjust the calendar
Access this submenu to select the desired language
Access this submenu to select one of the three types of user
interface: COMPRESSED, SCROLLING or EASY.
During operation (i.e. when the stove is on and in steady
operating conditions) the stove can be switched off when
reaching the set room temperature (SET ROOM T.) and start
again when reaching the set minimum room temperature
(START TEMP.).
Two parameters can be set:
Access this submenu to activate or deactivate the buzzer. The
alarm signals are always active in either case.
When the stove is off this function ensures the stove maintains
the set room temperature (useful at night) (NIGHT SET T.);
This menu has just one parameter, which can be set to
"OFF" (function disabled) or alternatively a temperature value
(between 3° and 20°C) representing the temperature below
which the stove will start.
Access this submenu to disable or enable operation of the
parameters. When this function is active, simply press the
and buttons together to lock or reset panel operation.
OFF
Restores the factory settings.
Access this submenu to set the stove's maximum operating
output in automatic mode.
The set power level will never be exceeded, thus keeping fuel
consumption under control.
button ("OK").
("+") and
("x") to exit the menu.
("-") buttons.
SYMBOLS & MESSAGES
When this function is active,
the display shows the "*"
symbol.
"STAND-BY" is displayed
when the room temperature
is higher than the set "START
TEMP.".
When this function is active,
the display shows the " "
symbol.
" N I G H T S T A N D - B Y " i s
displayed when the room
temperature is higher than the
set "NIGHT SET T".
ON