Assembling The Balance - Precisa 321 Serie Instrucciones Breves

4.3

Assembling the balance

CAUTION
Before connecting the device to the mains, be sure that the operating voltage stated on the device and on the
power adaptor agrees with the local mains voltage. Do not touch any key during the following start-up sequence
until after about 3 seconds an acoustic signal sounds.
A M
C, D, G
• Place the dust protection cover on the balance.
• Install the windshield (1).
• Place the balance pan holder in position and add
the balance pan (2).
• Insert the supplied power supply unit into the
socket (19) on the back of the balance.
Series 321
23