LeD inDicAtors
the led indicators allow you to monitor, diagnose, and troubleshoot any potential problem within the
switch, connection, or attached devices.
System Power :
Green
Off
Link/Act :
10Mbps
100Mbps
Off
100M Speed :
Green
Off
PoE MAX :
Green
Off
Blinking Green
PoE Status :
Green
Red
Off
4
PoE MAX
Po E Status
Link/Act
System Power
power on
power off
When the 10mbps led lights on, the respective port is successfully connected to
10m ethernet network. otherwise, when the 10mbps led is blinking, the port is
transmitting or receiving data on the ethernet network.
When the 100mbps led lights on, the respective port is successfully connected to
100m Fast ethernet network. otherwise, when the 100mbps led is blinking, the port
is transmitting or receiving data on the Fast ethernet network.
no link
the port is connected to a 100mbps Fast ethernet station.
the port is connected to a 10mbps ethernet station or no link.
When the power output to pds is over 42W. no additional pds can be powered.
When the system is using less than 42W.
after the power output to pds has reached or exceeded the maximum power budget,
if the user unplugged certain pds and made the system power left over 10W, the poe
maX will blink 2 minutes.
When the poe powered device (pd) is connected and the port supplies power
successfully.
When the poe port has failed, possibly due to
1. poe power circuit shortage
2. power over current: over the power current of pd's classification
3. out of poe voltage of 44 ~ 57 Vdc output
no poe powered device (pd) connected.
Po E Port s
100M
1
23
45
PoE S witch
67
8
Des-1008pA