Led Indicators - D-Link DGS-1005P Guía De Instalación Rápida

LED INDICATORS

The LED indicators allow you to monitor, diagnose, and troubleshoot any potential problem within the
switch, connection, or attached devices.
LED
Power
Link/Act/Speed
PoE ( Ports1 to 4 )
PoE Max.
6
Color Status
Green Solid light
Off
Green Solid light
Blinking
Amber Solid light
Blinking
Off Light off
Green Solid light
Off
Amber Blinking
Amber Solid light
Blinking
Off Light off
Description
Power on
Power off
Connection to a 1000 Mbps Ethernet device.
The port is receiving or transmitting data.
Connection to a 10/100Mbps Ethernet device
The port is receiving or transmitting data.
No link
The port is successfully connected to a PoE
device and is powering the device properly.
No connection to a PoE device
A valid PoE load is connected to port output
lines, but the switch does not have sufficient
power for supplying the required load power.
Port power is not activated
Total power consumption is above 53W.
Output power to PoE devices has exceeded the
maximum power budget (60W).
Total power consumption is below Power Guard
Band (53W).
DGS-1005P