All-Frame Erase - Olympus Camedia D-340R Manual Del Usuario

NO
128
3
OK
YES OK 3
E

All-Frame Erase

This function works when the lens barrier is closed.
1
Display a picture.
2
Press the Erase mode button and Flash mode button
simultaneously. The All-Frame Erase indicator lights in the
upper right corner of the LCD monitor.
To cancel, press the Erase mode button again.
3
Press the OK (Shutter Release) button to erase all
pictures.
The camera makes a short single beep and the All-Frame
Erase indicator starts descending.
4
All pictures are erased after a few seconds. The blue
background display will appear on the LCD monitor.
If there are any protected pictures, they will not be erased
and the protected picture last taken will be displayed when
the erasing operation is completed.
All-Frame Erase is also available in the Index-Display
mode. (p. 114)
Caution:
Be careful not to erase important picture data by
mistake as it cannot be retrieved.
Never open the card cover, eject the card, remove the
batteries, or pull the plug while erasing pictures. It
may destroy the data in the card.
Do not press the Erase mode button while an image
is being loaded onto the LCD.