Recording An Audio Source - Aiwa AV-D50 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TO PLAY A DVD RECORDED
IN DOLBY
RECORDING
AN AUDIO SOURCE
DIGITAL SURROUND
This receiver
has the 5.1 INPUT
connectors
supporting
Dolby
Digital
decoder
with the 5.1 ch output
terminals.
When
a DVD
player that contains
a Dolby Digital decoder
is connected
to the
receiver,
you can enjoy theater-quality
audio right in your home
when playing
discs recorded
in Dolby Digital
Surround.
1
2
3
Press the VIDEO
1/5.1 CH button to select the
VIDEO 1 (DVD or MD) function.
Press the VIDEO 1/5.1 CH button again.
"5.1
CH"
appears
on the
display
and
the
DVD
player
connected
to the 5.1 INPUT terminals
is selected
as a source.
Start playing the DVD recorded
in Dolby Digital
Surround.
To resume the VIDEO
1, DVD (2 ch stereo) or MD function,
press
the VIDEO
1/5.1 CH button again.
The 5.1 CH function
is automatically
canceled
and the VIDEO
1, DVD or MD function
is selected:
- when the Dolby Pro Logic is turned on
- when headphones
are plugged
in
The 5.1 CH function
cannot be selected
while headphones
are
plugged
in.
1
2
3
Select the program source to be recorded.
Press one of the function
buttons.
Set the tape deck or MD recorder to the recording
mode.
Start the selected program source.
To monitor recorded sound during recording (when the
connected
tape deck is a three-head
system)
Press the TAPE MONITOR
button.
'TAPE
ON" appears
on the
display
for four seconds,
and then the source
name selected
in
step 1 comes back on. To cancel the tape monitor,
press it again
so that "TAPE OFF" appears.
m
Any sound control system has no effect on recording
(see page
8).
Input
sound
through
the 5.1
INPUT
terminals
cannot
be
recorded.
When
recording
the sound
from the DVD player,
connect the AUDIO OUT (DOWN MIXING) terminals
of the DVD
player to the VIDEO
l/DVD/MD
AUDIO
IN terminals
of the unit.
When recording
sources
by the MD recorder
connected
to the
VIDEO
l/DVD/MD
AUDIO
OUT terminals,
select
the source
after pressing
the VIDEO 2 or VIDEO 3 button (V2 or V3 should
be displayed).
Recording
cannot be done while the VI indication
is displayed
on the window.
Input
sound
from
the tape
deck
connected
to the TAPE
MONITOR
IN terminals
cannot
be recorded.
I 1 ENGLISH

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido