Presetting Stations - Aiwa AV-D50 Manual De Instrucciones

PRESETTING STATIONS
PRESET NUMBER TUNING
1 Nwnberd buttons
DOWN
UPEM
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1
2
3
Press the TUNER button to select the band, and
press the
UPA
or DOWNY button to select a
station. Direct tuning is also available.
Press the SET button to store the station.
A preset number assigned to the station, beginning from 1 in
consecutive order for each band, flashes in the display for
two seconds.
Repeat steps 1 and 2.
No more stations will be stored if a total of 32 stations have
already been stored for all the bands.
1 Press the TUNER button to select a band.
2 Press the numbered buttons to select a preset
number.
Example:
To select preset number 25, press 2 and 5.
To select preset number 7, press O and 7.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the SET button, and press the SET button again within four
seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
When using the remote control
Press UP- or DOWN- button to select a preset number.
The DIGIT buttons on the remote control can not be used when
selecting a preset number.
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
13
ENGLISH