Replacing The System Outer Foil And The Inner Blades; The Inner Blades - Panasonic ES‑LV9N Instrucciones De Funcionamiento

• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or discoloration of
the parts.
Wipe with diluted soapy water.
• Do not use any kitchen or bathroom detergents other than hand
soap.
Doing so may cause malfunction.
• Do not use the self‑cleaning recharger while droplets or soap
remain on the shaver.
Doing so may change the concentration level or composition of
the cleaning liquid in the cleaning liquid unit, which may degrade
cleaning, sterilization, lubrication and drying performance. This
may also cause cleaning liquid to spill from the self‑cleaning
recharger.

Replacing the system outer foil and the inner blades

appears on the lamp display once a year. (Based on one
3‑minute shave use per day)
We recommend checking the system outer foil and the inner
blades when it appears.
Press the power switch for more than 30 seconds to turn off
Even if is not turned off right after the replacement, it will
automatically turn off within approximately 7 uses.
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark (
securely attach the outer foil section to the shaver
until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release buttons and
pull down the system outer foil.
2. Align the foil frame mark (
outer foil mark ( ) and securely attach
together until it clicks.
• Do not press the system outer foil release
buttons with excessive force.
Doing so may bend the system outer foil, preventing complete
attachment to the foil frame.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
.
Note
Do not throw away the foil frame.
) to the front,
) and the system
17