Section 4 - Left-Hand And Air Release Installation - Holland RK-10855-L Instrucciones De Instalación

4. Left-Hand and Air
Release Installation
NOTE: For right-hand release instructions, see page 9.
1. Remove the cam bolt and rotate the cam away from
lug "A" (Figure 7).
2. Place drill fixture on top of the lugs with the "L" facing
up. Place the cam bolt into the fixture. Insert the locator
pin into the hole in lug "B" (Figure 8).
3. Clamp drill fixture to the fifth wheel. Drill through lug "A"
with a #7 (0.201) drill bit (Figure 9). Remove and discard
the drill fixture. DO NOT reuse the fixture.
XL-FW10064BM-en-US Rev A · 2011-12-02 · Amendments and errors reserved. © SAF-HOLLAND, Inc.
Installation Instructions
Figure 7
Figure 8
Figure 9
7