Publicidad
Idiomas disponibles
Idiomas disponibles
Section 4: Operation
How to Stop Pressure
Washer
• Turn engine off according to instructions
_ven in engine
owner's manual.
• Squeeze
trigger
on spray gun to relieve
pressure
in hose,
NOTE:
A small amount of water wilt squirt out when you
release the pressure,
How to Use Adjustable
Nozzle
You should now know how to START
and STOP
your
pressure washer.The
information
in this section wilt tell
you how to adjust the spray pattern and to apply detergent
or other cleaning chemicals.
CAUTION
I,
Slide nozzle forward when you wish to adjust spray to
low pressure mode (Figure 9). Slide nozzle backward
to achieve high pressure.
Slide nozzle backward
Slide nozzle forward
for
for high pressure mode: low
p_ssure
mode _nd
detergent
application.
2,
,
4,
S,
6,
Point nozzle down towards a firm surface and press
trigger to test spray pattern (Figure I0).
Twisting nozzle adjusts spray pattern from a narrow
pattern to a fan pattern (Figure I I).
Twist nozzle
Twist nozzle clockwise
counterclockwise
for fan
for narrow spray
spray pattern,
pa_ern.
}:or most effective cleaning, Keep spray nozzle frorr
8 to 24 inches away from cleaning surface.
If you get spray nozzle too close, especially using high
pressure mode, you may damage surface being cleaned.
DO NOT get: closer than 6 inches when cleaning tires.
m
Publicidad
