Setting Date And Time; Entering Pin Ii; Setting The Audio Music System - KBL megaSun Serie Manual De Usuario

time using the plus and minus buttons 2, 3, 7, 8.
Press START. Proceed in the same way for
BON BOF
and .
4. Press STOP to leave the menu.

Setting date and time

The current time and date are set within the menu
item TIME/DATE . This information is required for
the proper execution of the timer function for the
decorative lighting. Date and time are displayed for
approx. 2 seconds after the unit has been turned on.
TIME/DATE
1. Invoke the
2. Choose the time setting with START and set the
time by pressing the plus or minus buttons to the
corresponding number.
3. Choose the date setting using 5 (plus button) or
0 (minus button) and set the date by pressing
the plus or minus buttons to the corresponding
number. The day of the week is determined
automatically.
4. Save the settings using START and press STOP
to exit the menu.

Entering PIN II

④⑤
By entering your PIN II here, you will be admitted to the
next service level. (See Settings on service level II ).
Setting the audio music
system
④[⑤]
STANDARD AUDIO SOURCE
The menu item AUDIO/PRESEL
which audio source is selected as the default source
when the tanning session is started. Only sources
that are activated under
AUDIO
1. Invoke the menu.
2. Press START to invoke the submenu and press 5
(plus button) or 0 (minus button) to select
3. Preselect the desired source by pressing 4 (plus
button) or 9 (minus button).
4. Press START to save the settings and STOP to
exit the menu.
AOF
④
menu.
④
is used to determine
WPS
can be selected.
WPS
ACTIVATING/DEACTIVATING AUDIO SOURCES
,
The menu item
which audio sources are to be made available to the
salon client. W=Wellness, P=Pop, S=Studio Music.
In the case of a top mark (apostrophe:
responding source is activated while it is deactivated
if a bottom mark is shown (comma:
sources are listed under
AUDIO
1. Invoke the
2. Use START to invoke the submenu and 5 (plus
button) or 0 (minus button) to select
Set the desired value by using the plus and minus
buttons to the corresponding letters.
3. Press START to save the settings and leave the
menu by pressing STOP.
MUSIC VOLUME IN TANNING MODE
The menu item
determine the volume of the music during a tanning
session. The maximum possible volume of the unit
is at 100 %.
1. Invoke the AUDIO menu.
2. Use START to invoke the submenu and press 5
(plus button) or 0 (minus button) to select VOL.
hOT.
3. Set the desired percentage by pressing 4 (plus
button) or 9 (minus button).
4. Press START to save the settings and STOP to
exit the menu.
MUSIC VOLUME IN STANDBy MODE
Use the menu item
whether music is also played during standby
operation (ON) or not (OFF).
AUDIO
1. Invoke the
2. Use START to invoke the submenu and 5 (plus
button) or 0 (minus button) to select
.
3. Set NONSTOP ON
NONSTOP OFF
4. Press START to save the settings, and leave the
menu by pressing STOP.
M a n u a l d e u s u a r i o | megaSun 4000 / 4500
AUDIO/WPS
is used to determine
). All activated
AUDIO/PRESEL
menu.
④
AUDIO/VOL.HOT
is used in order to
④
AUDIO/NONSTOP
menu.
by pressing 4 (plus button) or
by pressing 9 (minus button).
④
), the cor-
.
PRESEL
.
to determine
NONSTOP .
27