Error Messages - KBL megaSun Serie Manual De Usuario

Error messages

Only the errors "Exhaust air" and "max. time" can occur with the KBL/5 processors.
Status Status
message message
KBL/4 KBL/5
Exhaust
Exhaust air
air
Maximum max. time
tanning time!
hardware
Error
Bus Relais
Error
E05:BUS:REL
E04:BUS:VOICE
E02:BUS:TMP
42
M a n u a l d e u s u a r i o | megaSun 4000 / 4500
Status description
Bi-metal switch triggers.
Enabling signal from coin-
box/timer system longer
than approved, i.e. the value
specified under "Maximum
tanning time" (voltage
remains connected).
Main board defective.
aquaCool relay board defective.
I²C bus faulty.
Faulty data communication between
control board and Voice MP3 player.
I2C temperature sensor
faulty or defective.
Remedy
Check the air-intake/air-discharge system and the
fan. Let the sunbed cool down and acknowledge the
message by pressing the START button. If the fault
persists, contact your Customer Service.
Disconnect the sunbed from the coin-box/timer
system.
Replace the main board (contact your Customer
Service).
Replace the aquaCool relay board.
Contact your Customer Service.
1. Check the "Voice" SD card.
2. Contact your Customer Service.
Contact your Customer Service.