Fixing The Power Supply - Schick Dental QUBE II Manual De Instrucciones

 2. To mount the knee control device, place the recessed backside on the suspension strip
and push it backwards until you can feel it latch in.

Fixing the power supply

Fasten the power supply with the velcro provided.
The included self-adhesive velcro can be used to fasten the power supply in the footwell of the
worktable.
1.
 1. Remove one of the two protective foils from the velcro strip and adhere it to the power
supply.
 2. Remove the second protective foil from the velcro strip and adhere the power supply to a
clean, dry and flat surface.
Avoid continuous tensile loads on the power supply caused by improperly
laid cables!
D21518 Original
2.
Instructions
Installation and commissioning 6
17/32