Installation; Mounting The Pdu; Connecting The Pdu - Tripp-Lite PDUMH15AT Manual Del Propietário

2. Installation

2.1 Mounting the PDU

The PDU supports 1U Rack configurations.
Note: The user must determine the fitness of
hardware and procedures before mounting. The PDU
and included hardware are designed for common
rack and rack enclosure types and may not be
appropriate for all applications. Exact mounting
configurations may vary.
1U Rack Mounting: Attach the PDU to the
rack by inserting four user-supplied screws
through the PDU mounting brackets
into the mounting holes of the rack rail as
shown.

2.2 Connecting the PDU

All PDU models include a primary and secondary AC power input (see diagram). The reference
table below lists each model's primary and secondary inputs:
Model
PDUMH15AT
PDUMH15ATNET
PDUMH15HVAT
PDUMH15HVATNET
PDUMH20AT
PDUMH20ATNET
PDUMH20HVAT
PDUMH20HVATNET
Note: The PDUMH15HVATNET model uses plug lock inserts over C13 plugs to securely connect to the C14
primary and secondary inputs.
PDUMH15AT
2.2.1
PDUMH15ATNET
Primary Input (120V Models)
16-05-185-9335E0.indb 3
A
and
B
Primary Input
NEMA 5-15P (permanent cord)
NEMA 5-15P (permanent cord)
IEC C14 inlet (detachable cord)
IEC C14 inlet (detachable cord)
NEMA 5-15P (permanent cord)
NEMA 5-15P (permanent cord)
IEC C20 inlet (detachable cord)
IEC C20 inlet (detachable cord)
Secondary Input
9
PDUMH20AT
2.2.1
PDUMH20ATNET
3
B
A
PDUMH15AT, PDUMH15ATNET,
PDUMH20AT, PDUMH20ATNET
B
A
PDUMH15HVAT, PDUMH15HVATNET
B
A
PDUMH20HVAT, PDUMH20HVATNET
Secondary Input*
IEC C14 inlet
IEC C14 inlet
IEC C14 inlet
IEC C14 inlet
IEC C20 inlet
IEC C20 inlet
IEC C20 inlet
IEC C20 inlet
Primary Input
PDUMH15HVATNET
PDUMH20HVATNET
Primary Input (208-240V Models)
PDUMH20HVAT
7/28/2016 3:04:39 PM