Tripp-Lite PDUMH15AT Manual Del Propietário página 4

2. Installation
2.2.2 To connect the Secondary
input cord:
Form a loop in the Secondary cord
secure the juncture of that loop to the Primary
cord with a zip tie. Be sure the zip tie is
B
secured around the Secondary and Primary
cords, as well as through the loop created in
the Secondary cord
Note: Allow the cord as much slack as possible
between the loop and the cord's outlet.
On Models PDUMH20HVAT and
PDUMH20HVATNET, both cords should be tied
to the Cable Retention Tray. (See diagram).
Once two cords are secured and the
Secondary cord has an acceptable amount of
slack, insert the Secondary cord outlet into the
IEC power inlet.
Note: The PDUMH15HVATNET model uses plug lock
inserts over C13 plugs to securely connect to the
C14 primary and secondary inputs.
2.2.3 Connect Input Plug
Adapters (Optional - Models
PDUMH20AT, PDUMH20ATNET
Only):
The PDU includes two adapters that convert
one or both of the L5-20P input plugs to
5-20P input plugs. Connecting the adapters is
optional. The PDU will function normally
without connecting the adapters.
2.2.4 Connect Secondary Input
Cord to PDU:
Although the PDU will operate without
connecting the Secondary input cord, the
Secondary input is required for the PDU's
Automatic Transfer Switch function.
16-05-185-9335E0.indb 4
and
A
. (See diagram).
C
B
C
2.2.2
2.2.3
PDUMH15AT,
PDUMH15ATNET
Secondary Input
9
2.2.4 PDUMH15HVAT, PDUMH15HVATNET
4
A
PDUMH20AT,
PDUMH20ATNET
PDUMH20AT,
PDUMH20ATNET
Primary Input
7/28/2016 3:04:40 PM