Tripp-Lite PDUMH15AT Manual Del Propietário página 9

2. Installation
Enable DHCPv6 for the Ethernet interface [Y]?
Enable static IPv6 for the Ethernet interface [N]?
DNS server [8.8.8.8]?
This card's host name [poweralert-0610337151181]?
This card's domain []?
From this point forward, press <Return> for each option to accept the default
configuration:
Enable SNTP [Y]?
Enable FTP [Y]?
Port number [21]?
Enable HTTP [Y]?
Port number [80]?
Enable HTTPS [Y]?
Port number [443]?
Enable Telnet Menu [Y]?
Port number [23]?
Enable Telnet Programs [Y]?
Port number [5214]?
Enable SSH Menu [Y]?
Enable SCP [N]?
Port number [22]?
Enable SSH Programs [Y]?
Port number [2112]?
Enable SNMP [Y]?
Port number [161]?
Enable SNMPv1 [Y]?
Enable SNMPv2c [Y]?
Enable SNMPv3 [Y]?
Do you wish to modify the network watchdog configuration? [N]?
HARDWARE PARAMETERS:
Would you like to update the RTC date/time in GMT [N]?
Time Zone in 30 minute intervals, +/-HH:MM[-06:00] (+ is optional):
Do you wish to configure the advanced settings [y/n]
SECURITY SETTINGS:
Would you like to update the Root Password [N]?
Do you wish to modify the users [N]?
Do you wish to modify the auth and accounting method? [N]?
Do you wish to modify the radius hosts table? [N]?
Erase the server private key passphrase?
Erase the client private key passphrase?
New passphrase for server private key?
Re-enter passphrase for server private key?
New passphrase for client private key?
Re-enter passphrase for client private key?
MISCELLANEOUS SETTINGS:
How long (in seconds) should CPU delay before starting up [5]?
Saving the changes in NV memory...Done.
When "Done" appears, the card will reboot and the assigned static IP will become active.
Once the new static IP settings are displayed, proceed to 2.4 Test and Configure.
9
16-05-185-9335E0.indb 9 7/28/2016 3:04:44 PM