Product Structure; Using The Thermostat - Grunkel RACP-80D Manual De Instrucciones

13. NOTE: When using, don't open the door or window high frequency to avoid influence
warm yourself.
14. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid hazard.
15. After open the product, it can make mild sound, it's normal.
16. Do not use this heater in the immediate surroundings of a bath ,a shower or a swimming
pool.
17. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
18. Children of less than 3 years should be kept away unless continuously supervised
19. Children aged from 3 years and less than 8 years shall only switch on/off the appliance
provided that it has been placed or installed in its intended normal operating position and they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children aged from 3 years and less than 8 years shall not
plug in, regulate and clean the appliance or perform user maintenance.
CAUTION — Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.

Product structure:

Do not operate the heater without the base support fixed correctly!
1. Fix the rear support base, fit it tightly against the fin, until is stays in place.
2. To fix the front support base, fit it tightly against the bottom on the front panel.
3. After fixing the supports, confirm that the heater is stable on the floor.
Keep the appliance vertically while using it.

Using the thermostat:

1. The thermostat will automatically maintain your desired room temperature.
2. Turn the thermostat control clockwise all the way round until you hear a click, this sound
indicates that the oil heater is activated, the pilot light is ON. Continue turning the
thermostat control clockwise to its highest setting.
3. When the pilot light is "ON", the heater is activated. This light turns ON and OFF repeatedly
11