Allmatic NC4 Serie Manual De Instrucciones página 47

ALLMATIC
Function
Fig. 2: NC4 - 125 Sectional view
By turning the drive (3) clockwise with a crank, the spindle nut (1) moves in clamping direction
with the mobile jaw. The scrapers (2) prevent dirt from entering the thread of the spindle. The
clamping force is increased with a pressure booster (4).
When turned to the stop, at least the specified clamping force is reached.
Avoid internal tension.
Damage to the NC4.
Ø Only clamp workpieces from the outside.
NC4
Description | 4
EN
47 / 376