Tools Required; Materials Required; Grounding The Refrigerator; The Installation Space - Monogram ZWE23E Instrucciones De Instalación

TOOLS REQUIRED

• Adjustable wrench
• 3/8" socket ratchet/driver
• Phillips head screwdriver
• Flat-Head ScrewdriveR
• 5/32", 3/32", 1/8", 1/4" Allen wrenches
• 1/8" Drill bit and electric or hand drill
• Tape measure
• Pencil
• Wire cutters
• 1/4" Nut driver
• Level
• Torx T20, T25

MATERIALS REQUIRED

• 1/4" O.D. compression nut and 2 ferrules (sleeves)
™
OR GE SmartConnect Refrigerator Tubing Kits

GROUNDING THE REFRIGERATOR

IMPORTANT – (Please read carefully)
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
The power cord of this appliance is equipped with
a 3-prong (grounding) plug which mates with a
standard 3-prong (grounding) wall receptacle to
minimize the possibility of electric shock hazard
from this appliance.
Have the wall outlet and circuit checked by a
qualified elec tri cian to make sure the outlet is
properly grounded.
Where a standard 2-prong wall outlet is en coun tered,
it is your personal responsibility and obligation to
have it replaced with a properly grounded 3-prong
wall outlet.

Installation Instructions

5
FLOORING
For proper installation, this refrigerator must be placed on
a level surface of hard material that is at the same height
as the rest of the flooring. This surface should be strong
enough to support a fully loaded refrigerator.
IMPORTANT NOTE: Protect the finish of the flooring.
Cut a large section of the cardboard carton and place
under the refrigerator where you are working.
DO NOT, UNDER ANY
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG
FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT
THE REFRIGERATOR TO A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH
THIS APPLIANCE.