System Test - Detnov CAD-150-8 Manual Del Instalador

A quick test of the system can be performed as follows:
• Create a fault, such as a loop open circuit or a power failure, and check that the fault
relay operates and the fault is indicated on the LEDs and LCD.
• Cause an alarm to occur and check that the alarm relay outputs are activated and the
correct sounders operate (after the correct delay, if programmed).
Note: A power failure may take several minutes to be indicated.
GB
4- Manuals
Product manuals are available on the attached electronic device in PDF format. Adobe
Acrobat Reader is required to view a manual. To download Acrobat Reader free, visit the
Adobe website.
If you have any doubts about the functioning of the unit, please contact the Technical
Service or contact your nearest distributor.
•
User level code
•
Installator level code

3.4- System Test

Manufacturing passwords
10
1111
2222