Uponor Smatrix Remote Access Module R-56 SMS Manual De Instalación Y Funcionamiento página 3

Uponor Smatrix Remote Access
Module R-56 SMS
SMS description
See picture A for system description
The Uponor Smatrix Remote Access Module R-56 SMS can remote
control a changeover between comfort and ECO-mode. The module is
connected to the controller via an Uponor Smatrix Wave Thermostat
Public T-163/Uponor Smatrix Base Thermostat Public T-143 (public
thermostat T-163/T-143). The thermostat sends a message to the
controller when the relay status in the SMS module is changed. A
closed relay forces ECO-mode. This gives the following basic remote
control:
• The homeowner can set the system to ECO-mode when leaving the
house by sending an SMS.
This is the recommended way since this also gives a function
verification for the remote service.
Note! This will also be possible by manual operation, i e by using a
button on the module.
• The homeowner can, at will, set the system remotely by SMS to
comfort or by manually pressing the button on the SMS module.
• The SMS module can also be used with any other dry contact
sensing input, i.e. heating/cooling, boiler on/off etc.
Additional SMS functions are
• temperature readout and temperature alarms
• alarm settings, phone number to send to and limits
• parameter configuration
U P O N O R S M AT R I X R E M O T E A C C E S S M O D U L E R - 5 6 S M S
UK
1