Sears Kenmore 73141 Manual Del Usuario página 17

Transferring the center hinge bracket
Donot
remove
thisscrew
Cen|er Right
oJ
"%.
(a) Remove the center hinge bracket by removing the
three Torx screws_ NOTE: Keep these screws with the
hinge bracket., They are longer screws and will be used
when installing the hinge on the other side.
(b) Remove the three Torx screws from the center left
side of the cabinet. Screw them into the holes on the right
side, which were uncovered in step (a) above_
L@
Do not remove
this screw
Center Left
(c) Place the center hinge bracket over the holes at the
center left side of the cabinet, insert the three screws that
were removed with the center hinge bracket in step (a)
and tighten them.
Transferring the top hinge
Interchange hinge and screws at top right with
screws at top left of the cabineL Do not tighten
the screws on the hinge side at this time.
Transferring door handles
Freezer door
1
(a) Remove screw holding handle to top of door.
(b) Remove'three screws holding handle to bottom of
door.
(c) Transfer screw from handle hole in top right of door
to opposite side
(d) Transfer plug button in top left of door to opposite
side.
(e) In reverse order, reassemble handle to right side of
door using screws removed in Steps (a) and (b).
Fresh food door
Long Handle
ShorlHandle
(a) Transfer two screws in bottom left of door to
opposite side. (Wait until handle is moved before
reinstalling front screw.)
(continued next page)
17