Installation & Connection; Safety Regulations - Novovent Domestic Serie Manual De Instrucciones

Storing
In case of long term storage, the apparatus must be kept free from dust, and away from areas susceptible
to heat and vibration.
The Manufacturer declines any responsibility for any damage as a result of negligence or
lack of protection from atmospheric agents.
Definitions
CUSTOMER: The Customer is the person, activity or the society, that has bought or hired the unit, and
intends to utilise the machinery for its intended use.
USER / OPERATOR: The User or Operator is the actual person that has been authorised by the Cus-
tomer to utilise the unit.
QUALIFIED PERSONNEL: Defined as the person who has followed a relevant specific course of study,
and so is able to understand the dangers derived from the use of the machinery, and in turn, due to this,
are capable of solving major dilemmas.

Safety regulations

The Manufacturer declines any responsibility for failure to respect the Safety Regulations and
the prevention as described below. Furthermore, the Manufacturer declines any responsibility
for damage caused by the improper use of the unit and/or modifications carried out without
proper authorisation.
• Qualified personnel must carry out the installation.
• During the installation operation, use protective clothing, for example: glasses, gloves, etc. as indicated
by 686/89/CEE and successive regulations.
• During the installation operate in absolute security, pollution free air and in an area free of obstructions.
• Respect the regulations in force in the country in which the apparatus is being installed. Specifically
relative to its use, and to the disposal of packing and products used for the cleaning and maintenance
of the unit. Respect the recommendations given by the producers of such products.
• Before placing in function the unit, check the perfect connection of the various components and the
internal parts of the system.
• Avoid at all costs human contact with moving parts and contact with the parts themselves.
• Do not commence with servicing or cleaning of the unit, before the unit has been disconnec-
ted from the main supply.
• The maintenance and the substitution of damaged or consumed parts must be carried out only by
specialised personnel, following the indications found within this manual.
• Spare parts must correspond to the requirements specified by Manufacturer.
• In case of dismantling of the unit, respect the anti-pollution regulations in force.
N.B: The installer and the user of the apparatus must take into account, and solve problems, connected
installation & connection
9
3