Operation Instruction - Bresser 4CAST PC Manual Del Usario

1.3 OPERATION INSTRUCTION

You are able to use the TEST function to look for a better location
• Press TEST button, " SCAN " is shown in the Information Window.
• Pick the unit to find a good location.
• flashing : The test is running and the Meteotime signal reception is good. You are able to
leave the device in this position.
flashing : The test is running and the Meteotime signal reception is poor. You need to
keep on looking for a better location.
• The test lasted for around 1 minute. You can restart the test with the [ TEST ] key at any
time, and also discontinue the test by press the TEST key.
SWITCH CITY <- -> SUNRISE & SUNSET TIME <- -> TIME & DATE
• After inserting the batteries, the weather station searches for the Radio controlled Time
signal as well as the MeteoTime signal. After it has successfully received the MeteoTime
signal, the display shows in the information window "Select Country". After a few more
minutes, the information windows the default city "
• You are able to press [ SET ] to switch from the display of the City to Sunrise & Sunset time
OR Time & Date for Frankfurt am Main.
SELECT THE COUNTRY AND CITY / CITIES
• Press and Hold [ SET ] for 3 second , in the information window,
and then press [
country name such as
• Press [ SET ] key to confirm the Country (let's said we select Germany right now), and then
the information window will show
• Then, press [ ] or [
information window such as
[ SET ]
] or [ ] key to select the country. For example, you have selected the
means Germany will be shown in the information window.
] key to select the city, and the city name will be shown in the
[ SET ]
.
means the city 'Frankfurt am Main'
56
".
is shown,