Before Testing; Calibration; How To Code The Meter; Checking The Code Number - PET Gluc Manual Del Propietário

BEFORE TESTING

Calibration

You must calibrate the meter every time you begin to use a new vial of
test strips by setting the meter with the correct code. Test results may be
inaccurate if the code number displayed on the monitor does not match
the number printed on the strip vial.

How to Code the Meter

The Pet Gluco meter is supplied with two code strips. There is one for cats,
and one for dogs.
Please check the Pet Gluco meter with the corresponding code strip for
your pet to ensure proper performance.

Checking the Code Number

1. Insert the code strip when the monitor
is off. Wait until the code number appears
on the display.
NOTE:
Make sure the code number on display, code
strip, and test strip vial are the same.
2. Remove the code strip, the display will
811
show "OK". This tells you that the meter
has finished coding and is ready for blood
glucose testing.
You need to make sure that the code
number displayed on the meter matches
the number on the test strip vial for your
animal type before you proceed. If it
15