General; Electrical Connection; Installation Instruction - Faber Jelling opti-myst Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 58
L

2.2 General.

The stove produces a flame effect without heating function, so you can enjoy the flame effect all
year long.
ATTENTION: When the appliance is used in a room with very little background noise, a noise can
heard which is caused by the movement of the flame effect. This is normal and no reason for
concern.
Only use tap water with a maximum hardness degree of 10°Dh (you can ask your water supplier about the
hardness degree). This is necessary in order to lengthen the lifetime of the smoke unit. In situations with
a higher water hardness, the water should be filtered (for example with a Maxtra filter).
Do not use a decalcifier when cleaning the appliance, this may shorten the lifetime of the
smoke unit.

2.3 Electrical connection

This appliance should be connected to an earthed wall socket.
Check before you connect the stove if the mains voltage corresponds with the information on the
name plate.

2.4 Installation instruction

Carefully unwrap the stove, and keep the packaging for future use, for example a removal or return
of the stove to the supplier. The remote control, batteries and lights are packed together with the
log set.
Please read the warning labels carefully and place the stove. For the correct measurements, please
refer to the dimensional drawing in figure 1. Always ensure that the stove is levelled.
2.4.1 Removing the glass.
Open the drawer. Lift the glass from the groove, and tilt the lower part to the front and downward.
Reinstall the glass in reverse order.
2.4.2 Placing the log set.
Place the log set in accordance with figure 4 and ensure that the opening is not covered and put the
chips on the bottom in between the logs of wood (also see the supplied log set card).
Although the log set can be arranged in a different manner or removed altogether, the best flame
effect is reached by arranging the log set in accordance with the instructions. Do not add any
flammable decorations.
17 <
<
<
<

Publicidad

Tabla de contenido
loading

Tabla de contenido