Iso Din Head Unit Provision With Pocket - Metra 99-7953 Instrucciones De Instalación

ISO DIN head unit provision
1. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
2. Mount the ISO brackets to the head unit
with the screws supplied with the unit.
(Figure A)
3. Slide the head unit into the radio
opening until the side clips engage.
(Figure B)
4. Snap the trim plate into the radio
housing. (Figure B)
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-7953
with pocket
5
(Figure A)
(Figure B)
Right
Side Clip