Kit Assembly; Iso Ddin Radio Provision - Metra 95-3305 Instrucciones De Instalación

ISO DDIN radio provision

1. Slide the ISO DDIN radio brackets
into the radio housing, aligning the
holes in the radio housing to the clips
on the brackets. (Figure A)
2. Slide the radio unit into the
completed assembly, and then
secure using the screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
(Figure B)

Kit Assembly

dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
4. Reassemble the dash in reverse
order of disassembly.
Suzuki XL-7 only: Trim the top corners
of the radio housing. (Figure C)
95-3305
(Figure A)
(Figure C)
9