Ignitor Lighting the Griddle
CAUTION
!
•
Do not use water on a grease fire. Personal
injury may result. If a grease fire develops,
turn knobs and LP cylinder off.
•
Do not leave grill unattended while preheating
or burning off food residue on HI. If grill has
not been regularly cleaned, a grease fire can
occur that may damage the product.
Do not lean over griddle while lighting.
1. In order for the igniter switch to work, please
make sure the battery is properly installed.
2.
OFF
Turn
gas burner control valves.
!
ON
3. Turn
gas at LP cylinder.
4. To ignite, push and turn the
BURNER
5. Push and hold
button until the
6. If ignition does
burner controls
the lighting procedure.
7. To ignite remaining burners, turn each burner
knob in sequence to the position, starting with
the burner closest to the
8. Once each burner has ignited, turn knobs to
desired setting.
IGNITION
MAX.
knob to
ELECTRONIC IGNITION
IGNITION BURNER
NOT
occur in 5 seconds, turn the
OFF
, wait 5 minutes and repeat
IGNITION BURNER
lights.
.
9