Kenmore 116.36822 Manual Del Propietário página 12

TO REMOVE DUST BAG
1. Pull outward on
the dust cover grip,
located near the top !!i;
of the dust cover and
remove the cover.
Lay cover aside.
__2. Grasp the dust bag
J"_/'_JJ,/_ t collar and pull gently,
,__}_J j'_'_ I t carefully removing the
1 /'1 li
3. Throw away the used dust bag.
Do not reuse.
4. Check the bag
holder and the
motor safety filter.
If either is
blocked, check
TROU-
BLESHOOTING.
NEVER REUSE A DUST BAG. Very fine
materials, such as carpet freshener,
face powder, fine dust, plaster, soot,
etc. can clog the bag and cause it to
burst before it is full. Change bag more
often when vacuuming these materials.
TO REPLACE DUST BAG
1. Unfold the
new dust bag.
Fold the safety
seal tab on the
new dust bag
away from the
opening that
fits on the bag
holder.
Duet
Bag
Safety
SeeJ Teb
NOTE: See PARTS AND FEATURES for
bag number.
2. Insert the dust bag
onto the bag holder
completely by holding
the bag collar.
3. Place the dust bag
collar into position.
Be sure the bottom and sides of the dust
bag are completely within bag cavity prior to
replacing the bag cover.
4. Position the dust
cover so its posi-
tioning tab fits into
the body position-
ing tab slot.
5. Close the dust
cover.
You will hear a
distinct snap
when cover is
securely closed.
Check to see that the dust bag is fully
enclosed in the dust cover.
12