Chauvet Professional EPIX DRIVE 642 Guía De Referencia Rápida página 10

ÉPIX™ Drive 642 QRG
1. Select the
product is connected to.
If you are running a hard-wired line
from the PC to your router, then select
Local Area Connection. The Local Area
Connection Status dialog appears.
2. Click Properties. The Local Area
Connection Properties dialog
appears.
1. From the Networking tab, select
Internet Protocol Version 4
(TCP/IPv4).
2. Click Properties. The Internet
Protocol Version 4 (TCP/IPv4)
Properties dialog appears.
1. From the General tab, select Use the
following IP address:.
2. Enter the following information:
3. Enter 2.255.0.0 in the IP address box.
4. Enter 255.255.255.0 in the Subnet
mask box.
5. Click OK.
6. Close existing dialogs that are
currently open.
7. Minimize the Control Panel, as it will
be necessary to access this window
after the software upgrade is
uploaded to the product.
Step 5:
desired network
Step 6:
Step 7:
the
10
EN
2 . 255 . 0 . 0
255 . 255 . 255 . 0