Chauvet Professional EPIX DRIVE 642 Guía De Referencia Rápida página 13

EN
Once the software upgrade is complete, the IP
setting on your PC needs to be changed back to the
original settings.
1. Refer to Step 4 for navigation
instructions on how to access the
Internet Protocol Version 4 Properties
(TCP/IPv4) dialog.
2. From the General tab, select Obtain
an IP address automatically, and
click OK.
3. Continue to close the dialogs
displayed until you exit out of the
Control Panel.
The installation process is complete.
Step 13:
13
ÉPIX™ Drive 642 QRG