Springlane Kaia Manual De Instrucciones página 24

Assembling Kaia
Install basic jug
1. Place the basic jug on the motor block
with the arrow of the motor block
pointing to the I on the container. Turn
the container clockwise until the two
arrows are pointing at one another.
The container is now engaged and sits
securely on the motor block.
2. Place the insert on the pin of the basic
jug. Install the desired attachment.
3. Place the lid on the basic jug so that
it is properly supported. Turn the lid
clockwise until it clicks into place and
sits securely on the container.
4. Use the two-piece plunger to add the
ingredients. Remove the round, inner
plunger if you are using long, narrow
ingredients such as carrots, parsnips or
cucumbers with the slicing or grating
discs.
Install blender jug
1. Add your ingredients to the blender
jug.
2. First, fit the lid on the blender jug and
turn it clock wise until it clicks into
place. Once you have done this, place
the blender jug on the motor unit.
3. Place the blender jug on the motor
unit with the arrow of the motor unit
pointing to the I on the container.
24
Make sure that the blender jug is
correctly positioned and locked in
place. Turn the container clockwise
until the two arrows are pointing at
one another. The container is now
engaged and sits securely on the
motor block.
4. You can add more ingredients through
the opening in the lid. Make sure to
follow the other safety and usage
instructions for the blender jug.
Setting the speed
• Use the rotating control knob to set
the speed (stepless adjustment). To do
so, turn the knob clockwise to increase
the speed or counter-clockwise to
reduce the speed.
• Turn the control knob to OFF to
switch off Kaia.
Selecting a programme
• Turn the control knob to MODE to
select a programme.