Kit Assembly - Metra 95-8204 Instrucciones De Instalación

ISO DDIN radio provision
1. Snap the ISO DDIN trim plate into
the radio/a-c vent panel removed
in dash disassembly. (Figure A)
2. Secure the ISO DDIN brackets
to the radio using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash and make all necessary
connections to the radio
and climate controls. Metra
recommends using the proper
mating adapters from Metra and/
or AXXESS. Reconnect the negative
battery terminal and test the radio
for proper operation.
4. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
95-8204
(Figure B)
3