Kit Assembly; Din Radio Provision - Metra 99-3320 Instrucciones De Instalación

1. Slide the aftermarket radio's "metal" DIN sleeve into the radio housing. Then
secure it to the housing by bending the metal locking tabs outward. (Figure A)
2. Slide the aftermarket radio into the completed assembly until it clicks in.
(Figure B)
(Figure A)

Kit Assembly 99-3320

DIN radio provision

3. Locate the factory wiring harness in the dash. Metra recommends using the
proper mating adapter from Metra or AXXESS. Re-connect the negative battery
terminal and test the radio for proper operation.
Continue to dash assembly
(Figure B)
6