Dash Disassembly - Metra 95-8223 Instrucciones De Instalación

1. Unclip and remove the (4) side trim
panels from the right and left side of the
radio and a/c controls. (Figure A)
2. Unclip and remove the a/c vent panel
above the factory radio. (Figure B)
3. Remove (4) 10 mm bolts securing the
radio. (Figure C)
4. Remove (8) screws securing the
brackets to the factory radio and remove
the brackets. Note, retain clips for re-
use during kit assembly. (Figure D)
5. Remove (4) plastic clips from the back
of the factory radio. Note, retain clips for
re-use during kit assembly.
Continue to kit assembly
95-8223

Dash Disassembly

(Figure A)
(Figure C)
(Figure B)
(Figure D)
2
Remove (4) screws from factory bracket
REMOVE (4) SCREWS
from each side
FROM FACTORY BRACKET FROM EACH SIDE