Stacked Iso Mount Units Provision - Metra 99-8220 Instrucciones De Instalación

Stacked ISO mount units provision

1. Cut and remove the center bar from the
radio housing. (Figure A)
2. Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B)
3. Slide the stacked ISO mount units into
the bracket/housing assembly and
secure the units to the assembly using
the screws supplied with the units.
(Figure C)
4. Snap the Double DIN trim plate onto
the front of the radio/housing assembly.
(Figure C)
5. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
6. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-8220
9
(Figure A)
(Figure B)
(Figure C)