Iso Mount Radio Provision With Pocket - Metra 99-8220 Instrucciones De Instalación

ISO mount radio provision with pocket

1. Mount the ISO brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Slide the radio into the radio housing
until it snaps into place. (Figure B)
3. Snap the trim plate onto the front of the
radio/housing assembly. (Figure C)
4. Snap the pocket into the radio housing.
(Figure D)
5. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
6. Reassemble dash in reverse order
of disassembly.
(Figure A)
Kit Assembly 99-8220
7
(Figure B)
(Figure C)
(Figure D)