Iso Radio Provision With Pocket - Metra 99-7322 Instrucciones De Instalación

ISO radio provision with pocket

1. Mount the ISO brackets to the
aftermarket radio using the screws
supplied with the radio. (Figure A)
2. Slide the radio into the radio opening
until the side clips snap into place.
(Figure B)
3. Snap the trim plate into the radio
housing. (Figure B)
4. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-7322
6
(Figure A)
(Figure B)
Right side clip