Descargar Imprimir esta página

Metra 99-7314 Instrucciones De Instalación

Kia optima 2001-2006.5

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Kia Optima 2001-2006.5
KIT FEATURES
• ISO DIN radio provision with pocket
KIT COMPONENTS
A) Radio housing
A
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7301
Antenna Adapter: • Not required
TOOLS REQUIRED
Phillips screwdriver
METRA. The World's best kits.
Installation instructions for part 99-7314
99-7314
metraonline.com
Table of Contents
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
CAUTION!
Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION

Publicidad

loading

Resumen de contenidos para Metra 99-7314

  • Página 1 • ISO DIN radio provision with pocket KIT COMPONENTS A) Radio housing CAUTION! Metra recommends disconnecting the negative bat - tery terminal before beginning any installation, unless the vehicle manufacturer recommends against so. Please check with your local WIRING & ANTENNA CONNECTIONS (sold separately) Dealership for more information.
  • Página 2 99-7314 Dash Disassembly 1. Unclip the dash trim bezel. 2. Disconnect the clock and climate control wiring, then remove the bezel. 3. Remove (4) Phillips screws securing the factory radio, then unplug and remove the radio. Continue to kit assembly...
  • Página 3 4. Locate the factory wiring harness and antenna connector in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation. (Figure A) 5. Reassemble the dash in reverse...
  • Página 4 Installation instructions for part 99-7314 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
  • Página 5 Instrucciones de instalación para la pieza 99-7314 Indice Kia Optima 2001-2006.5 99-7314 Desmontaje Dash ........... 2 Ensamble del kit – Provisión de radio ISO DIN con cavidad ....3 CARACTERÍSTICAS DEL KIT • ISO DIN radio provision with pocket COMPONENTES DEL KIT A) Carcasa del radio ¡PRECAUCIÓN!
  • Página 6 99-7314 Desmontaje Dash 1. Desenganche el bisel de la moldura del tablero. 2. Desconecte el cableado del reloj y del control del clima, luego quite el bisil. 3. Quite los (4) tornillos Phillips que sujetan del radio de mercado secundario, y luego desconecte y quite del radio.
  • Página 7 3. Deslice el radio de nuevo en la manga hasta que haga clic. (Figura A) 4. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o (Figura A) de AXXESS.
  • Página 8 Instrucciones de instalación para la pieza 99-7314 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...