Acura Rsx 2002-2006; Dash Disassembly; Acura Tl 1996-1998 - Metra 99-7898 Instrucciones De Instalación

Acura RSX 2002-2006

1. Unclip the lower dash panel (containing the power outlet) and remove the panel.
2. Reach into the opening and remove (2) Phillips screws from the base of the factory radio.
3. Slide the factory radio (with bracket assembly) from the dash and disconnect
the wiring. (Figure A)
4. Remove (4) Phillips screws securing the factory radio to the bracket assembly
and remove the radio (if a factory pocket is present, remove (4) Phillips screws
securing the pocket to the bracket assembly and remove). (Figure A)
5. Cut and remove the all mounting clips on the radio housing EXCEPT clips "J"
(the clips can be identified by the stamped letter near each clip). (Figure B)
6. Mount the rear support bracket (R2) to the back of the radio housing with (2) #8
x 3/8" Phillips pan head screws supplied.
Continue to kit assembly
(Figure A)

Dash Disassembly

(except "S" model)
"J"
"J"
(Figure B)
99-7898

Acura TL 1996-1998

1. Using a small screwdriver, unclip the
perimeter of the radio trim bezel.
(Figure A)
2. Disconnect the climate control
and rear defroster wiring and
remove the bezel.
3. Remove (4) Phillips screws securing
the factory radio/trim bezel
assembly. (Figure A)
4. Loosen (2) Phillips screws securing
the back of the radio to the metal
(Figure A)
5
housing and slide the radio out (it is
not necessary to remove the screws
securing the metal).
5. Disconnect the wiring.
6. Cut and remove all of the mounting
clips on the radio housing EXCEPT
clips "B" and "K" (the clips can be
identified by the stamped letter near
each clip). (Figure B)
Continue to kit assembly
"B"
"B"
"K"
"K"
(Figure B)