Honda Civic Se 2005 (Only) - Metra 99-7898 Instrucciones De Instalación

Honda Civic
1999-2000
7. Cut the zip ties securing
the radio and climate
control wires, slide the
dash trim bezel/radio
assembly from the dash
cavity and disconnect the
wiring.
8. Cut and remove all of the
mounting clips on the
radio housing EXCEPT
clips "B" and "H" (the
clips can be identified by
the stamped letter on the
back of the housing, near
each clip).
(Figure B)
Continue to kit assembly
1. Unsnap and remove the trim ring from
around floor shifter.
2. Unsnap and remove larger trim around
floor console shifter.
3. Remove (2) Phillips screws from in
between cup holder and shifter.
(Figure A)
4. Unsnap sides of console (2 snaps per
(Figure A)
99-7898
Dash Disassembly
Honda Civic SE 2005
side) and remove with power
outlet assembly.
5. Remove (2) Phillips screws from under
radio assembly, facing up. (Figure A)
6. Remove (3) screws securing the climate
control pod to the back of the dash trim
bezel and remove the pod. (Figure B)
7. Remove (4) Phillips screws from each
(Figure B)
9
(only)
side securing the factory head radio to the
bracket assembly and remove the radio.
8. Cut and remove all mounting clips on
the radio housing, EXCEPT clips "B"
and "H" (the clips can be identified by
the stamped letter on the back of the
housing, near each clip). (Figure C)
Continue to kit assembly
"B"
"H"
"H"
(Figure C)
"B"