Acura Vigor 1992-1994; Honda Accord 1990-1993 - Metra 99-7898 Instrucciones De Instalación

Acura Vigor 1992-1994

1. Remove the access cap from the
climate control cluster and (1) screw
exposed. (Figure A)
2. Unclip the cluster and remove (2)
screws exposed. (Figure A)
3. Remove the ashtray and (2) Phillips
screws exposed.
4. Remove the cover caps from each
front corner of the center console
and the screws exposed.
5. Open the storage compartment,
lift up the carpet and remove (2)
screws exposed.
(Figure A)
Dash Disassembly
6. Lift up on the center console and
remove. Unclip the radio trim bezel
and disconnect the wiring.
7. Remove (2) bolts from the back of the
factory radio and disconnect the wiring .
8. Cut and remove all of the mounting
clips on the radio housing EXCEPT
clips "A" and "H" (the clips can be
identified by the stamped letter on
the back of the housing, near each
clip). (Figure B)
Continue to kit assembly
"A"
"A"
"H"
"H"
(Figure B)
99-7898

Honda Accord 1990-1993

1. Remove (4) screws from the lower
portion of the center console.
(Figure A)
2. Remove the gear shifter knob and
lift the console out. Remove the
ashtray and ashtray bracket.
3. Remove (2) screws from the
bottom of the radio support,
slide the radio out and disconnect
the wiring.
4. Cut and remove all of the mounting
clips on the radio housing EXCEPT
clips "C" and "H" (the clips can be
identified by the stamped letter on
the back of the housing, near each
clip). (Figure B)
Continue to kit assembly
6
(Figure A)
"C"
"C"
"H"
"H"
(Figure B)