Kit Assembly; Important - Metra 02-3320 Instrucciones De Instalación

1. Attach the 02-3320 brackets to the Metra
GM J-body kit (sold separately) using the (2)
carriage bolts and (2) Keps nuts supplied.
(Figure A)
2. Follow the instructions provided with the
Metra GM J-body kit for installing the radio.
3. Locate the factory wiring harness and
antenna connector in the dash and complete
all necessary connections to the radio.
Metra recommends using the proper mating
adapter from Metra. Test the radio for proper
operation.
4. Slide the radio assembly into the dash and
then secure using the screws removed in
dash disassembly.
5. Reassemble the dash in reverse order of
disassembly.
METRA. The World's best kits.
Installation instructions for part 02-3320

Kit Assembly

(Figure A)
™
metraonline.com

IMPORTANT

If you are having difficulties with the
installation of this product, please call our
Tech Support line at 1-800-253-TECH.
Before doing so, look over the instructions a
second time, and make sure the installation
was performed exactly as the instructions
are stated. Please have the vehicle apart
and ready to perform troubleshooting steps
before calling.
K
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
P
OWER