Powering Up The Systems - Belkin OmniView PRO3 Manual Del Usario

Ocultar thumbs Ver también para OmniView PRO3:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 194
Installation

Powering Up the Systems

Verify that all servers connected to the PRO3 KVM Switch are powered on. If
any connected servers have not been powered on, it is okay to do so at this time
(servers can be powered on simultaneously). The PRO3 KVM Switch emulates
both a mouse and keyboard on each port and allows your server to
|boot normally.
The server connected to Port "1" will be displayed on the monitor. Check that the
keyboard, monitor, and mouse are working normally. Check all occupied ports to
verify that all servers are connected and responding correctly. If you encounter
an error, check your cable connections for that server and reboot. If the problem
persists, please refer to the "Troubleshooting" section in this User Manual.
1
2
3
4
5
6
7
8
25
25

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

F1da104zeaF1da108zeaF1da116zea

Tabla de contenido