Hummer H2 2003-2007 - Metra 95-2001 Instrucciones De Instalación

1. Open center console and remove
(4) 9/32" screws from console
box and remove box. (Figure A)
2. Remove (4) Phillips screws
from hinge on console door
inside console and remove door.
(Figure B)
3. Loosen (1) T-15 torx on forward
facing side of shift lever and pull
up to remove. (Figure C)
4. Unclip cup holder/shifter trim
assembly and remove. (Figure D)
Step 1
(Figure A) (Figure B)
95-2001 or 99-2001
Dash Disassembly

Hummer H2 2003-2007

5. Remove (6) Phillips screws from
top of center console. (Figure F)
6. Remove (2) Phillips screws from
inside pocket on back of center
console, then unclip and remove.
7. Remove (1) 10mm bolt to right
of shift lever. (Figure E)
8. Remove (2) Phillips screws from
under console box on drivers
side and (2) Phillips screws
from under console trimtop on
passenger side. (Figure F)
Step 3
Step 2
(Figure C)
®
9. Slide control assembly
rearwards. (Figure F)
10. Remove (2) T-30 torx bolts from
top of rado/climate control trim
and unclip and remove. (Figure G)
11. Remove (3) 9/32" screws that
hold the radio in. (Figure G)
Continue to kit assembly
Step 4
(Figure D)
14
Step 9
(Figure E) (Figure F)
(Figure G)
Step 8
Step 5