Dash Disassembly; Buick Century 1997-2005; Buick Le Sabre 1995-2005; Buick Park Avenue 1995-2005 - Metra 95-2001 Instrucciones De Instalación

Buick Century 1997-2005

Buick Regal 1995-2004

1. Remove the plastic trim piece to the left of the
glove box and (1) Phillips screw exposed.
2. Unsnap the top edge of the knee bolster panel.
3. Remove (1) Phillips screw from the panel.
4. Remove the ashtray cluster and (2) Phillips
screws from each side.
5. Unclip the entire dash trim bezel and remove.
6. Open doors and unsnap end caps from each side
of dash.
7. Unsnap and remove radio/instrument cluster panel.
8. Remove (3) screws in order to remove radio.
Continue to kit assembly
(Figure A)
95-2001 or 99-2001

Dash Disassembly

Buick Le Sabre/Buick
Park Avenue 1995-1999
1. Unsnap the climate control trim panel (from door
to door) and remove (4) Phillips screws exposed.
(Figure A)
2. Pop out the a/c vents and remove (1) Phillips
screw exposed in each vent cavity. (Figure A)
3. Unclip the radio trim bezel and remove.
4. Remove the screws securing the factory head
unit and disconnect the wiring.
Continue to kit assembly
4
4
4
2
2
2 2
1 1 1 1 1
(Figure A)
4
®
Buick Le Sabre/Buick Park
Avenue 2000-2005
1. Open drivers door and unsnap and remove dash
end cap.
2. Unsnap and remove trim along center of dash
(one piece on right and one on left of wheel).
3. Unsnap and remove radio/instrument bezel.
4. Remove (2) screws in order to remove radio.
Note: For the Buick LeSabre, (3) speed clips and
screws will need to be supplied to attach the kit
into the sub-dash where the screw holes line up
with the kit.
Continue to kit assembly
(Figure A)