Oldsmobile Achieva
1996-1998
1. Open the glove box, press inward on the walls of
the glove box liner and remove the liner.
2. Remove (10) torx-head screws from the glove box
location.
3. Remove (2) 9/32" hex-head screws under the
steering column.
4. Unclip the dash trim bezel. (Figure A)
5. Remove the screws securing the factory head unit
and disconnect the wiring.
Continue to kit assembly
(Figure A)
95-2001 or 99-2001
Dash Disassembly
Oldsmobile Alero
1999-2004
1. Remove shift knob by using a small screwdriver to
remove U-clip from front of shifter and pull upward.
2. Unclip and remove shifter trim panel.
3. Unclip and remove radio and climate control panel
by pulling from bottom. (Figure A)
4. Remove (3) 9/32" screws from radio and remove.
Continue to kit assembly
(Figure A)
15
®
Oldsmobile Aurora
1. Unclip the radio trim bezel and remove the bezel.
(Figure A)
2. Remove (2) 7mm screws securing the factory head
unit and disconnect the wiring.
Note: For the 2001-2003 models,(3) speed clips
and screws will need to be supplied to attach the
kit into the sub-dash where the screw holes line up
with the kit.
Continue to kit assembly
(Figure A)
1995-2003