Metra 99-9000 Instrucciones De Instalación página 3

Kit Assembly
DIN head unit provision (continued)
4. Place the head unit/kit
assembly under the dash until
the desired mounting location has
been established. (Figure B)
5. Mark the screw holes onto
the dash.
6. Re-connect the battery
terminal and test the unit for
proper operation.
7. Mount the head unit/kit
assembly to the pre-marked
holes on the dash with (8) Phillips
screws supplied (If the back of
the Underdash Housing was
removed in Step #1, fewer screws
will be used). (Figure C)
(Figure B)
(Figure C)
99-9000
3
Notes